Our Products Distributor
Leaf Bolt
On the strength of its expertise in the development and distribution of components, G.S. has explored new horizons to provide a diverse range of machined, forged, cast, and sub-assemblies.
| TYPE | Flat,Half-Round,Full-round,Half-Round with Forged – Section, Full – Round with Forged – Section,Flat with Forged – Section . |
| Stem Length | Min. – 40 mm Max.-650 mm ,Dia – Min.-7mm Max.-30 mm, centre distance between stems – Min.-24 mm Max. – 130 mm |
| Thread | Metric ,UNF/UNC or BSF/BSW Thread Length – Max upto 200 mm, Rolled threads.Thread Pitch – 1 mm To 3 mm |
| Materials | M.S,SAE – 1015 ,EN-8,CK-45,SAE – 1541,41Cr4,SAE – 4140,Strength – 5.6 , 8.8,10.9 |
| Surface Treatment | Phosphating , Zinc Plating(Yellow, Blue & Green) Powder Coating (Black & red) |
| Bending | Cold & Hot both facilities are available |
Spring Bolt W Nut
| Type | Round Head with Slots & Milled Head Hot and Cold both Head forming facilities are available. |
| Length | Min. – 75 mm Max.-450 mm |
| Dia | Min.-8 mm Max.-18 mm |
| Thread | Metric,UNF/UNC or BSF/BSW, CUT & Rolled threads |
| Materials | thread length – Max. 75% of Total length |
| Surface Treatment | Mild Steel,8.8 Grade,10.9 Grade(H.T. Materials are Hardened & tempered) Phosphating,Auto-Black & Zinc Plating Passivated. |
Casting Products
| Item-Range | Hanger Shackles / Brackets, Threaded Ring, Compressor Mounting/Brackets, Other Cast – Components |
| Weight range | Min.-lKg., 50 Gm. Max. – 25Kg. |
| Material | SG Iron Grade 500/7, 450/10 as per IS 1865 / FCD 45/GGG50 |
| Surface Treatment | Electroplated & Powder Coating (Black, Red & Grey |
Bushes
GENUINE NUTS / AXLE CHECK NUTS
| TYPE | Plain, Grooved |
| Length | 25 mm To 100 mm |
| Dia (Outer) | Max. 55 mm |
| Dia (Inner) | 15 mm |
| Materials | Al – Bronze (Self lubricated) / Zinc Bronze / Manganese Bronze |
| Finish | Ground |
Hub Bolts
Forged Parts are Wheel Bolts, Spindle Damper, Shock Absorber Pins High Nuts, Castle Nuts, Hex Nuts, Flange Nuts, Washer Type Nuts, Misc. Nuts
| Type | Round-head, Milled Head, D-type Head, Centre Head |
| Length | Min.-30mm Max.-180 mm |
| Dia Body | Min. -10 mm Max. – 40 mm |
| Dia head | Min. -15 mm Max. – 50 mm |
| Thread | Metric, UNF / UNC or BSF / BSW, Pitch – 1.0, 1.25, 1.50, 2.0, 2.5, 3.0 |
| Material | M.S., EN-8, SAE-1541, 41Cr4, SAE-4140 |
| Strength | 5.6, 8.8,10.9 grade |
| Surface Treatment | Phosphating, Auto-Black & ZInc-PlatIng with White, Yellow & Green Passivated |
Nuts GENUINE NUTS / AXLE CHECK NUTS
| TYPE | Hex (Heavy & Small), Conical, Nylock, Castle, Flange, Cut-Nut |
| Across – Flat | Max – 50 mm |
| Thread | Metric, UNF/UNC or BSF/BSW,Thread Pitch, 1, 1.25, 1.5, 1,75, 2,2.25, 3 in metric series |
| Materials | Mild Steel, Low Carbon Steel, EN-8, EN-15, EN-18 |
| Heat-Treatment | Hardened & Tempered (Medium) Carbon & Alloy Steel
|
| Surface Treatment | Phosphating, Auto-Black & Zinc Zinc Plating. (With Yellow / White Passivation) |
Pins
Machine Parts King Pin Set, Spring Pins, Shackle Bolts, Check Nuts, Axle Studs, U-Bolts, Centre Bolts, Miscellaneous Bolts and Genuine Nuts.
| Length | Max. 250 mm |
| Dia | Min. 20 mm IVIax. 44 mm |
| Material | SAE – 8620, SAE – 4140, SAE – 1541, EN – 353, EN -19 |
| Heat -Treatment | Case Carburised or Induction – hardened |
| Hardness Surface | 62 HRC Max. |
| Case-Depth | 3.0 mm Max. by Induction hardening process, 1.5 mm Max. by Case – Carburising process |
| Surface Treatment | Phosphating, Mn-Phosphating, Hard-Chrome Plating, Zinc-Plating,Rust preventive oil film |
